How to Assemble
How to unpack and assemble
When you receive your Easy Seat/Potty Trainer, it will be boxed and wrapped in a bubble wrap packaging on receipt. You should fi rstly ensure that you remove all the parts from the box and then unwrap them in preparation for assembly. Please check that you have all the parts you ordered. To assemble and adjust the easy Seat/Potty Trainer, an allen key may be required. An allen key is supplied with each seat.
The Easy Seat/Potty Trainer is supplied with your choice of legs with or without castors, backrest, side pads, lap strap and choice of accessories. To slot your choice of legs into position, it is important that you identify the left and right hand side of the legs supplied. When in position the popper and castor fixing screw at the base should be in line and facing away from the child. To slot the legs into position push poppers (a), slide the leg into the receiver and once the desired slot is obtained, check that the poppers have released and are positioned securely. It is advisable when setting up your Easy Seat that all the legs are initially in the same slot.
Always use caution to ensure finger do not become trapped in the slot when attaching the legs.
Always make sure the footrest is firmly attached.
Always use caution to ensure the child’s hands or arms donot become trapped when inserting the tray.
The flexible lateral supports are attached by using the allen bolts supplied and securing these into the sliders in the back of the seat.
The pommel is attached to the seat by an allen bolt (a) or knob which is located under the seat base.
Always remove the pommel before putting the child in or removing from the seat.
The Easy Seat can be converted to the Leckey Potty Trainer by simply lifting and removing the seat base and replacing it with the potty insert.
Attaching the push handle
If the push handle has been specified at the time of order a bracket will be attached. If the push handle is ordered separately, then the bracket should be attached to the back of the seat by securing it with the two allen bolts supplied. The push handle can then be inserted into the receivers by loosening allen bolts “a” and “b” selecting the position you require, then retightening the allen bolts.
If the headrest has been specified at the time of order a bracket will be attached. If the headrest is ordered separately, then the bracket should be attached to the back of the seat by securing it with the two allen bolts supplied. The headrest can then be inserted into the receiving bracket by loosening the allen bolt “a” selecting the position you require and retightening the allen bolt.
The headrest laterals are attached to the back of the headrest using the allen bolts supplied, secure these into the sliders on the back of the headrest.