Take a look at firefly GOTO seat

Firefly

Product Care

Clinical Setup

The clinical setup of the product should be completed by a technically and clinically competent person who has been trained in the use of the product. Leckey recommend that a written record is maintained of all clinical setups for this product.

Set the backrest height, seat depth and footplate height before placing the child in the seat. These can be fine-tuned when the child is in the seat.
 
Pelvic harness
For side adjustment, open the camlocks and either pull the straps to tighten or feed the straps through to loosen, depending on fit required (a). To adjust in the centre pull the D ring from the Velcro and feed strap through buckle on either strap to loosen the belt or pull D ring away from the buckle to tighten the belt (b).
 
Ensure strap is fed through the triglide as a safety precaution in case the camlock is opened accidently.
 

Hip laterals
To adjust the width of the hip laterals loosen the knob (a) adjust to the required width and retighten.
To adjust the depth, loosen the two allen bolts (b) with the multi tool provided, adjust to the required depth and retighten the allen bolts.
The angle of the hip laterals can be adjusted by loosening allen bolt (c), adjusting to the required angle and retightening the bolt.
 

Backrest height
The overall height of the backrest can be adjusted by loosening the two knobs, then positioning to the shoulder height of the user. Once in position the knobs should be retightened securely. The height can be fine-tuned when the user is in the seat. When the height is lowered the cushion must be pulled around the bottom of the backrest and secured to the back of it via the Velcro and elastic tabs.
 
Use caution when adjusting to minimum setting as fingers could become trapped between moving and static parts.
 

Backrest angle
The backrest can be angled by loosening the bolt (a) using a multi tool. Select the position you require then retighten the bolt securely. Always ensure the back angle is secure to maintain the desired posture for the child.
The backrest angle can be adjusted with the child in the seat, but always support the backrest with one hand.
 
Always make sure the bolt is secure as this could cause injury to the child or carer.
 

Seat depth
To adjust the seat depth simply loosen the knobs (a) on the underside of the seat base, pull the seat base towards you until the required seat depth has been achieved and tighten the knobs securely.

 
Footplate height
To set the height of Size 1 and 2 footplate, loosen the bolt (a) on the front of the calf support tube and slide the footplate to the required height and retighten the bolt. For Size 3, loosen the bolts on the sides of each calf support (b). Slide the footplate to the required height and retighten the bolt.
 
Always check the footplate is secure to prevent the user sliding forward and down in the seat which could pose a choking hazard if a chest or trunk harness is attached.
 

Footplate angle
To set the angle of the Size 1 and 2 footplate, loosen the ratchet handle (a) set to the required angle and retighten the handle. For Size 3 loosen the bolt (b), set to the required angle and retighten the bolt. 
 
Always use caution to ensure fingers do not become trapped when adjusting the angle.
 

Sacral support
To adjust the height, loosen the bolts on either side with the multi tool provided. Adjust the support to the correct height and retighten the bolts.
 
Always use caution to ensure fingers do not become trapped when adjusting the sacral support.
 

 
Chest lateral supports
Loosen the allen bolts (a) to adjust the width, height and angle of the lateral supports and retighten when you have achieved the desired position. To move the flipaway laterals, use knob (b).
 

Chest harness
To change the width of the chest harness, lift the front cover, adjust the Velcro straps to the desired width and replace the cover.

 
Trunk Harness
The trunk harness will be open but remain attached by side clip (a). When placing the child in the seating system bring the trunk harness across the front and attach by connecting the clip into the buckle on the other side (b). All of the connecting straps are adjustable.
 

Sandals
To position the sandals simply loosen the knob under the footplate, select the position required and refasten the knob. To position the user’s feet in the sandals secure the Velcro ankle straps provided.
 

Shoulder support
To adjust the height of the shoulder support, loosen the allen bolts, move the shoulder support bracket to the required height and retighten the bolts.
 
 
Head support
To adjust the height and depth of the Size 1 and 2 head support, loosen the hand knobs (a) and when set to the required position retighten the knobs. Use the same method for Size 3 only use the ratchet handle instead of knob (b). Do not remove the head support while the user is in the seat.
 
Never use the head support to force the position of the user’s head.
 
Always use caution to ensure fingers do not become trapped when adjusting the head support.
 

Armrest adjustment
To adjust the height of the armrest, loosen the hand knob (a), set to the desired height and retighten. To adjust the angle, rotate ratchet handle (b) until the desired position has been achieved.


Tray adjustment
The height and angle of the tray are set by adjusting the armrests as detailed in section 9.16 of the User Instructions. To remove or adjust the depth of the tray loosen the knobs (a) under the armrest, set to the desired position and retighten securely.
 
Always use caution to ensure the child’s hands or arms do not become trapped when inserting the tray.

Never use the tray to steer or push the chair.

Do not place objects, hotter than 40 degrees Celsius on the tray.

Please note that the tray is for the use of the user only. Do not lean or place objects on the tray, greater than 8kgs (17.6lbs).